I am hoping someone can point me in the right direction.
I currently own a Strida MK3 (older model) and the lock part it appears a mini ball baring washer part has broke or fallen out of the top part of the locking part.
It still locks but turning seems a bit off.
The part on the manual is 100-03 or 100-04 from which i can tell.
Would there be available replacements for this part or a way to fix it?
Problem is all the mini ball baring’s have gone and it is in two pieces the part which holds the ball baring’s.
Just days ago I’ve published a short article which is referring exactly to your issue - just in German: faltradforum.de/weitere-f77/ … t5025.html
In short words; it is definitely no problem to source those small bearings - BUT you need some special tools explicitly!
Either you use the original tools as below or you try a common “blind bearing puller” of matching size.
Unfortunately is the bearing change most likely the worst issue which can happen on a Strida and I’d recommend highly to hire professional help.
Of course I can tell you how that works - however do not even try without the required tools
What would the code be for the top bearing I’ll purchase both bearing just in case both are damaged I google the bearing pull kit and the highest I have seen was only £30 as I was starting to panic 200 euros was worth more than the bike itself second hand.
